Как компилировать в visual studio code

Как компилировать в visual studio code

In this tutorial, you configure Visual Studio Code to use the Microsoft Visual C++ compiler and debugger on Windows.

After configuring VS Code, you will compile and debug a simple Hello World program in VS Code. This tutorial does not teach you details about the Microsoft C++ toolset or the C++ language. For those subjects, there are many good resources available on the Web.

If you have any problems, feel free to file an issue for this tutorial in the VS Code documentation repository.


To successfully complete this tutorial, you must do the following:

Install the C/C++ extension for VS Code. You can install the C/C++ extension by searching for ‘c++’ in the Extensions view ( ⇧⌘X (Windows, Linux Ctrl+Shift+X ) ).

Install the Microsoft Visual C++ (MSVC) compiler toolset.

If you have a recent version of Visual Studio, open the Visual Studio Installer from the Windows Start menu and verify that the C++ workload is checked. If it’s not installed, then check the box and click the Modify button in the installer.

You can also install just the C++ Build Tools, without a full Visual Studio IDE installation. From the Visual Studio Downloads page, scroll down until you see Tools for Visual Studio under the All downloads section and select the download for Build Tools for Visual Studio.

This will launch the Visual Studio Installer, which will bring up a dialog showing the available Visual Studio Build Tools workloads. Check the C++ build tools workload and select Install.

Check your Microsoft Visual C++ installation

To use MSVC from a command line or VS Code, you must run from a Developer Command Prompt for Visual Studio. An ordinary shell such as PowerShell, Bash, or the Windows command prompt does not have the necessary path environment variables set.

To open the Developer Command Prompt for VS, start typing ‘developer’ in the Windows Start menu, and you should see it appear in the list of suggestions. The exact name depends on which version of Visual Studio or the Visual Studio Build Tools you have installed. Click on the item to open the prompt.

You can test that you have the C++ compiler, cl.exe , installed correctly by typing ‘cl’ and you should see a copyright message with the version and basic usage description.

If the Developer Command Prompt is using the BuildTools location as the starting directory (you wouldn’t want to put projects there), navigate to your user folder ( C:users ) before you start creating new projects.

Create Hello World

From the Developer Command Prompt, create an empty folder called "projects" where you can store all your VS Code projects, then create a subfolder called "helloworld", navigate into it, and open VS Code ( code ) in that folder ( . ) by entering the following commands:

The "code ." command opens VS Code in the current working folder, which becomes your "workspace". As you go through the tutorial, you will see three files created in a .vscode folder in the workspace:

  • tasks.json (build instructions)
  • launch.json (debugger settings)
  • c_cpp_properties.json (compiler path and IntelliSense settings)

Add a source code file

In the File Explorer title bar, select the New File button and name the file helloworld.cpp .

Add hello world source code

Now paste in this source code:

Now press ⌘S (Windows, Linux Ctrl+S ) to save the file. Notice how the file you just added appears in the File Explorer view ( ⇧⌘E (Windows, Linux Ctrl+Shift+E ) ) in the side bar of VS Code:

You can also enable Auto Save to automatically save your file changes, by checking Auto Save in the main File menu.

The Activity Bar on the far left lets you open different views such as Search, Source Control, and Run. You’ll look at the Run view later in this tutorial. You can find out more about the other views in the VS Code User Interface documentation.

Note: When you save or open a C++ file, you may see a notification from the C/C++ extension about the availability of an Insiders version, which lets you test new features and fixes. You can ignore this notification by selecting the X (Clear Notification).

Explore IntelliSense

In your new helloworld.cpp file, hover over vector or string to see type information. After the declaration of the msg variable, start typing msg. as you would when calling a member function. You should immediately see a completion list that shows all the member functions, and a window that shows the type information for the msg object:

You can press the Tab key to insert the selected member; then, when you add the opening parenthesis, you will see information about any arguments that the function requires.

Читайте также:  Как скинуть фото с разбитого телефона

Build helloworld.cpp

Next, you will create a tasks.json file to tell VS Code how to build (compile) the program. This task will invoke the Microsoft C++ compiler to create an executable file based on the source code.

From the main menu, choose Terminal > Configure Default Build Task. In the dropdown, which will display a tasks dropdown listing various predefined build tasks for C++ compilers. Choose cl.exe build active file, which will build the file that is currently displayed (active) in the editor.

This will create a tasks.json file in a .vscode folder and open it in the editor.

Your new tasks.json file should look similar to the JSON below:

The command setting specifies the program to run; in this case that is "cl.exe". The args array specifies the command-line arguments that will be passed to cl.exe. These arguments must be specified in the order expected by the compiler. This task tells the C++ compiler to take the active file ( $ ), compile it, and create an executable file ( /Fe: switch) in the current directory ( $ ) with the same name as the active file but with the .exe extension ( $.exe ), resulting in helloworld.exe for our example.

Note: You can learn more about task.json variables in the variables reference.

The label value is what you will see in the tasks list; you can name this whatever you like.

The problemMatcher value selects the output parser to use for finding errors and warnings in the compiler output. For cl.exe, you’ll get the best results if you use the $msCompile problem matcher.

The "isDefault": true value in the group object specifies that this task will be run when you press ⇧⌘B (Windows, Linux Ctrl+Shift+B ) . This property is for convenience only; if you set it to false, you can still run it from the Terminal menu with Tasks: Run Build Task.

Running the build

Go back to helloworld.cpp . Your task builds the active file and you want to build helloworld.cpp .

To run the build task defined in tasks.json , press ⇧⌘B (Windows, Linux Ctrl+Shift+B ) or from the Terminal main menu choose Tasks: Run Build Task.

When the task starts, you should see the Integrated Terminal panel appear below the source code editor. After the task completes, the terminal shows output from the compiler that indicates whether the build succeeded or failed. For a successful C++ build, the output looks something like this:

Create a new terminal using the + button and you’ll have a new terminal (running PowerShell) with the helloworld folder as the working directory. Run ls and you should now see the executable helloworld.exe along with various intermediate C++ output and debugging files ( helloworld.obj , helloworld.pdb ).

You can run helloworld in the terminal by typing .helloworld.exe .

Note: You might need to press Enter a couple of times initially to see the PowerShell prompt in the terminal. This issue should be fixed in a future release of Windows.

Modifying tasks.json

You can modify your tasks.json to build multiple C++ files by using an argument like "$\*.cpp" instead of $ . This will build all .cpp files in your current folder. You can also modify the output filename by replacing "$\$.exe" with a hard-coded filename (for example "$\myProgram.exe" ).

Debug helloworld.cpp

Next, you’ll create a launch.json file to configure VS Code to launch the Microsoft C++ debugger when you press F5 to debug the program. From the main menu, choose Run > Add Configuration. and then choose C++ (Windows).

You’ll then see a dropdown for various predefined debugging configurations. Choose cl.exe build and debug active file.

VS Code creates a launch.json file, opens it in the editor, and builds and runs ‘helloworld’.

The program setting specifies the program you want to debug. Here it is set to the active file folder $ and active filename with the .exe extension $.exe , which if helloworld.cpp is the active file will be helloworld.exe .

By default, the C++ extension won’t add any breakpoints to your source code and the stopAtEntry value is set to false . Change the stopAtEntry value to true to cause the debugger to stop on the main method when you start debugging.

Start a debugging session

  1. Go back to helloworld.cpp so that it is the active file.
  2. Press F5 or from the main menu choose Run > Start Debugging. Before you start stepping through the source code, let’s take a moment to notice several changes in the user interface:
  • The Integrated Terminal appears at the bottom of the source code editor. In the Debug Output tab, you see output that indicates the debugger is up and running.

    The editor highlights the first statement in the main method. This is a breakpoint that the C++ extension automatically sets for you:

    The Run view on the left shows debugging information. You’ll see an example later in the tutorial.

    At the top of the code editor, a debugging control panel appears. You can move this around the screen by grabbing the dots on the left side.

    Step through the code

    Now you’re ready to start stepping through the code.

    Click or press the Step over icon in the debugging control panel until the for (const string& word : msg) statement is highlighted.

    The Step Over command skip over all the internal function calls within the vector and string classes that are invoked when the msg variable is created and initialized. Notice the change in the Variables window on the left. In this case, the errors are expected because, although the variable names for the loop are now visible to the debugger, the statement has not executed yet, so there is nothing to read at this point. The contents of msg are visible, however, because that statement has completed.

    Press Step over again to advance to the next statement in this program (skipping over all the internal code that is executed to initialize the loop). Now, the Variables window shows information about the loop variables.

    Press Step over again to execute the cout statement. Note As of the March 2019 version of the extension, no output is displayed until the loop completes.

    If you like, you can keep pressing Step over until all the words in the vector have been printed to the console. But if you are curious, try pressing the Step Into button to step through source code in the C++ standard library!

    To return to your own code, one way is to keep pressing Step over. Another way is to set a breakpoint in your code by switching to the helloworld.cpp tab in the code editor, putting the insertion point somewhere on the cout statement inside the loop, and pressing F9 . A red dot appears in the gutter on the left to indicate that a breakpoint has been set on this line.

    Then press F5 to start execution from the current line in the standard library header. Execution will break on cout . If you like, you can press F9 again to toggle off the breakpoint.

    Set a watch

    Sometimes you might want to keep track of the value of a variable as your program executes. You can do this by setting a watch on the variable.

    Place the insertion point inside the loop. In the Watch window, click the plus sign and in the text box, type word , which is the name of the loop variable. Now view the Watch window as you step through the loop.

    Add another watch by adding this statement before the loop: int i = 0; . Then, inside the loop, add this statement: ++i; . Now add a watch for i as you did in the previous step.

    To quickly view the value of any variable while execution is paused on a breakpoint, you can hover over it with the mouse pointer.

    C/C++ configurations

    If you want more control over the C/C++ extension, you can create a c_cpp_properties.json file, which will allow you to change settings such as the path to the compiler, include paths, C++ standard (default is C++17), and more.

    You can view the C/C++ configuration UI by running the command C/C++: Edit Configurations (UI) from the Command Palette ( ⇧⌘P (Windows, Linux Ctrl+Shift+P ) ).

    This opens the C/C++ Configurations page. When you make changes here, VS Code writes them to a file called c_cpp_properties.json in the .vscode folder.

    Visual Studio Code places these settings in .vscodec_cpp_properties.json . If you open that file directly, it should look something like this:

    You only need to add to the Include path array setting if your program includes header files that are not in your workspace or in the standard library path.

    Compiler path

    The compilerPath setting is an important setting in your configuration. The extension uses it to infer the path to the C++ standard library header files. When the extension knows where to find those files, it can provide useful features like smart completions and Go to Definition navigation.

    The C/C++ extension attempts to populate compilerPath with the default compiler location based on what it finds on your system. The extension looks in several common compiler locations.

    The compilerPath search order is:

  • First check for the Microsoft Visual C++ compilerOpe
  • Then look for g++ on Windows Subsystem for Linux (WSL)
  • Then g++ for Mingw-w64.
Читайте также:  Как зайти на вторую страницу в одноклассниках

If you have g++ or WSL installed, you might need to change compilerPath to match the preferred compiler for your project. For Microsoft C++, the path should look something like this, depending on which specific version you have installed: "C:/Program Files (x86)/Microsoft Visual Studio/2017/BuildTools/VC/Tools/MSVC/14.16.27023/bin/Hostx64/x64/cl.exe".

Reusing your C++ configuration

VS Code is now configured to use the Microsoft C++ compiler. The configuration applies to the current workspace. To reuse the configuration, just copy the JSON files to a .vscode folder in a new project folder (workspace) and change the names of the source file(s) and executable as needed.

Microsoft Visual Studio Code Редактор довольно хороший, но он не имеет поддержки по умолчанию для построения проектов C++.

Как мне настроить его для этого?

10 ответа:

задачи сборки зависят от проекта. Чтобы создать новый проект, откройте каталог в Visual Studio Code.

следующим инструкциям здесь, нажмите клавишу Ctrl + Shift + P , тип Configure Tasks , выберите его и нажмите клавишу введите .

задач.файл json будет открыт. Вставьте следующий скрипт сборки в файл и сохраните его:

Теперь перейдите в меню FileпредпочтенияСочетания Клавиш, и добавьте следующую привязку ключа для задачи сборки:

Теперь, когда вы нажимаете F8 Makefile будет выполнен, и ошибки будут подчеркнуты в Редакторе.

существует гораздо более простой способ компиляции и запуска кода C++, без необходимости настройки:

  1. установить Code Runner Extension
  2. откройте файл кода C++ в текстовом редакторе, затем используйте ярлык Ctrl+Alt+N или нажмите клавишу F1 а затем выберите/type Run Code , или щелкните правой кнопкой мыши текстовый редактор и выберите Run Code в контекстном меню, код будет скомпилирован и запущен, а результат будет показан в окне вывода.
Читайте также:  Как обновить meizu m3s

кроме того вы можете обновить конфигурацию в настройках.json с использованием различных компиляторов C++ как вы хотите, конфигурация по умолчанию для C++, как показано ниже:

пример задачи makefile для новых задач 2.0.0.версия json.

в приведенном ниже фрагменте некоторые комментарии я надеюсь, что они будут полезны.

если ваш проект имеет конфигурацию CMake это довольно прямо вперед, чтобы настроить VSCode, например setup tasks.json , как показано ниже:

это предполагает, что есть папка build в корне рабочей области с конфигурацией CMake.

есть еще расширение интеграции CMake это добавляет команду "CMake build" в VScode.

PS! Элемент problemMatcher настройки clang -строит. Чтобы использовать GCC я считаю, что вам нужно изменить fileLocation to relative , но я не проверял это.

вот как я настроил свой VS для C++ с помощью компилятора g++, и он отлично работает, включая параметры отладки:

у меня также есть расширение "C/C++ для Visual Studio Code", установленное в VS Code

из-за разочарования в отсутствии четкой документации, Я создал проект Mac на github, который должен просто работать (как построение, так и отладка):

обратите внимание, что для этого требуется Xcode и расширение VSCode Microsoft cpptools.

Я планирую сделать то же самое для Windows и linux (если Microsoft не напишет достойную документацию в первую очередь. ).

с обновленным VS кодом вы можете сделать это следующим образом:

нажмите ( Ctrl + P ) и типа:

открыть папку ( Ctrl + K & Ctrl + O ) и создать новый файл в папке с расширением .cpp (например: Здравствуйте.cpp):

введите свой код и нажмите спасать.

нажмите ( Ctrl + Shift + P и типа Configure task runner и выберите other в нижней части списка.

создать пакетный файл в той же папке с именем построить.летучая мышь и включить следующий код в тело файла:

редактировать задач.json и сохранить это:

нажмите ( Ctrl + Shift + B для запуска задачи сборки. Это создаст .obj и .exe файлы для проекта.

для отладки проекта, нажмите F5 и выберите C++(Windows).

на запуск.json файл, отредактируйте следующую строку и сохранить в файл:

теперь есть расширение языка C/C++ от Microsoft. Вы можете установить его, перейдя к" быстро открыть " вещь ( Ctrl + p ) и введите:

вы можете прочитать об этом здесь:

это очень простой, по состоянию на май 2016 года.

вот как я настроил свой VS для C++

нужно установить расширение code runner — Ctrl+p -> ext install code-runner

скачать компилятор типа mingw

настроить переменные среды чтобы при запуске из консоли cmd команды gcc g++ и т. д. запускались соответствующие программы.

и в конце, в VSCode нужно настроить параметры запуска.
слева Run Code configuration
всё содержимое надо скопировать в правую сторону и там настроить камандную строку
"cpp": "cd $dir && g++ $fileName -o $fileNameWithoutExt",

Ссылка на основную публикацию
Как достать boot img из прошивки
Здесь процесс решения и результат, а не только готовый результат. Прежде всего хочется сказать, что если в интернете нет готового...
Как восстановить защищенную папку на самсунг
Тема безопасности личных данных выходит на первый план все чаще и чаще. Вероятность того, что при пересечении границы вас попросят...
Как восстановить маркер засохший
Обычный строительный (разметочный) маркер высох, как и чем его заправить. На упаковке маркеров (фломастеров) в начале прочитайте информацию о том...
Как зайти в телеграм если потерял сим
Можно предположить, что пользователь забыл номер телефона, к которому привязан его аккаунт в Телеграмме. Быть может, телефон был забыт или...
Adblock detector