Please remove the write protection

Please remove the write protection

Бывают ситуации, когда на файле стоит защита от записи, что зачастую достигается путем применения специального атрибута. Это приводит к тому, что файл можно просматривать, но не редактировать. Давайте разберемся, как с помощью программы Total Commander можно снять защиту от записи.

Снятие защиты от записи в Тотал Командер

Снять защиту от записи с помощью Total Commander можно с файла или со всей папки, причем это делается как локально, так и по FTP.

Вариант 1: Снятие защиты от записи с файла

Снять с файла защиту от записи в файловом менеджере Тотал Коммандер довольно просто.

    Прежде всего нужно уяснить, что выполняя подобные операции, требуется запускать программу только от имени администратора. Для этого кликаем правой кнопкой мыши по ярлыку Total Commander и выбираем пункт «Запуск от имени администратора».

После этого ищем нужный нам файл через интерфейс Total Commander и выделяем его. Затем заходим в верхнее горизонтальное меню программы и кликаем по наименованию раздела «Файл». В выпадающем меню выбираем самый верхний пункт – «Изменить атрибуты».

  • Для того чтобы снять защиту от записи, снимаем галочку с атрибута «Только для чтения», и чтобы изменения вступили в силу, жмем на кнопку «OK».
  • Вариант 2: Снятие защиты от записи с папок

    Снятие защиты от записи с папок, то есть с целых директорий, происходит по аналогичному сценарию.

      Выделяем нужную папку и заходим в функцию атрибутов.

    Вариант 3: Снятие защиты от записи по FTP

    Защита от записи файлов и директорий, расположенных на удаленном хостинге, при подключении к нему по протоколу FTP, снимается несколько иным способом.

      Заходим на сервер, используя соединение FTP.

    При попытке записать файл в папку «Test» программа выдает ошибку.

    Проверяем атрибуты папки «Test». Для этого, как и в прошлый раз, заходим в раздел «Файл» и выбираем параметр «Изменить атрибуты».

    На папке установлены атрибуты «555», что полностью защищает её от записи любого содержимого, в том числе и владельцем аккаунта.

    Для того чтобы снять защиту папки от записи, ставим галочку напротив значения «Запись» в колонке «Владелец». Таким образом мы меняем значение атрибутов на «755». Не забываем жать на кнопку «ОК» для сохранения изменений. Теперь владелец аккаунта на данном сервере может записывать в папку «Test» любые файлы.

  • Таким же образом можно открыть доступ членам группы или даже всем прочим участникам, изменив атрибуты папки на «775» и «777» соответственно. Но делать это рекомендуется только тогда, когда открытие доступа для данных категорий пользователей является обоснованным.
  • Выполнив указанные действия, вы легко снимете защиту от записи с файлов и папок в Total Commander как на жестком диске компьютера, так и на удаленном сервере.

    Отблагодарите автора, поделитесь статьей в социальных сетях.

    How to Remove Write Protection from USB or SD Card

    What Is the Write Protection Function

    USB or Memory Card Gets Write-Protection Error

    Common Methods to Remove Write Protection

    Related tips

    Have you ever meet the problem that it says "The disk is write-protected" when you want to access your SD card or USB flash drive, copy some files from it or format it? If you have, you can find the best solutions here to remove write-protection from your device.

    Video Guide — free to remove write protection on hard drive usb/pen drive sd card

    How to Remove Write Protection Error

    The disk is write-protected error message

    What Is the Write Protection Function?

    The write protection function is a technology that has been widely used on USB flash drives or memory cards and can help people protect storage device information away from any unexpected editing or changing. In other words, once the write protection function of your storage device is turned on, you often are not able to do any change to the inner stored data, including deleting, cutting, copying, editing and even formatting. So, in this way, it can be a really good way for people protect their important flash drive or memory card data. However, sometimes, it also brings troubles for storage device users.

    How to remove/disable write protection from SD memory card/USB pen drive/external hard drive in Windows 10/8.1/7? Do you need write protection removable software to disable write protection when it reports "The disk is write-protected. Remove the write protection or use another disk"?

    This article shares all possible methods to remove write protection, format write protected disk, and delete write protected files/folders on USB thumb drive/micro SD card/pen stick/portable HDD.

    USB Flash Drive or Memory Card Gets Write-Protection Error?

    Windows computer system warns you and says: "The disk is write-protected. Remove the write protection or use another disk", when you are merely trying to delete, cut or edit something stored on a memory card or USB flash drive? Really need to remove that unfamiliar "write protected" error and also do some changes to your memory card or USB drive files,videos, audios, photos and other stuffs? OK! Such write-protection error often happens when people do urgently want to erase or edit something inside. In such cases, generally, what people are supposed to do is only to turn off that write protection function at first.

    Читайте также:  Как правильно вставить карту в приемник телекарта

    Common Methods to Remove Write Protection from Memory Card or USB Flash Drive

    Do you know how to get rid of the write protection error of your memory cards or thumb drives? If not, also do not worry. Continue your reading and learn some common ways to remove that write protection within ease:

    Method1: Find Write Protection Switch

    remove write protection by write protect switch

    Many USB drive and memory cards are created with a special switch that often is placed on the one side of the storage device and can help people easily turn up or down the write protection functions. So, check your thumb drive or memory card and look for that specific switch. And then, simply slide it up or down to lock or unlock this device.

    Method 2: Try a Different Card Reader or Adapter

    Some USB memory card Readers or adaptors are manufactured with write-protection on. So, when you get such write-protected device error, it is not always your memory card or USB drive that has been write-protected. So, in such cases, simply change another different card reader or adaptor to have a try.

    Method3: Check if the device is full

    When the SD card or USB flash drive is full, it will show a write protection error, if you want to write something on it. You can check the space on the computer.

    Method4: remove write protect from Properties Setting

    Step1: open file explorer, find your SD card or USB

    Step2: Right click "Properties" option, unlock the "Read-only" box, then click "Apply".

    Then you can edit your files on the SD card or USB flash drive.

    Method5: Run Error-checking Tool

    remove write protection by error-checking tool

    Such write protected device error doesn’t always indicate your memory card or flash drive is really write-protected. It also can be aroused by some drive or memory card errors. So, you also can try to run the Windows error-checking tool and see whether this error problem could be removed. Merely right click this storage device in "My Computer" to highlight "Properties" and tab "Tools" to Press "Check Now…" And then, wait till the checking process is finished. And, at last, see whether you will receive the same write-protection problem again.

    Method6. Reset the Computer Registry

    remove write protection by resetting the computer registry

    If your computer has been set to write protect every external storage device all the time, you also will undoubtedly receive such write protection errors every time. So, to remove such unwanted errors completely, you’d better firstly reset your computer registry to remove that write protection function as below:

    Step1. Click "Start" to click "Run" and type in "regedit".
    Step2. Click "My Computer" > "HKEY_LOCAL_MACHINE" > "SYSTEM" > "CurrentControlSet" > "Control" > "StorageDevicePolicies".
    Step3. Find "Write Protect" key on the right side.
    Step4. Edit the DWORD value from "1" to "0"

    Please Note:

    If you find no "StorageDevicePolicies" under the "Control" folder, just right click "Control" folder to choose "New" and name the newly created key as "StorageDevicePolicies". And then, right click "StorageDevicePolicies" to highlight "DWORD value" in the "New" option list and name the newly created key as "write protect". And then, at last, edit the DWORD value as "0".

    Method7: format the SD card or USB

    This way is similar to reset your drive, and formatting can help you to erase something wrong, if your device is full, this way also works.

    Method8: remove write-protect with command prompt

    Step1пјљRun CMD on your windows system computer.

    run cmd to remove write-protect

    Step2: type"diskpart"in the window and press enter.

    run cmd to remove write-protect

    Step3: type"list disk"and enter.

    run cmd to remove write-protect

    Step4: type "select disk", find your SD card or USB flash drive, and type select "disk 1"(make sure disk 1 is your drive)

    run cmd to remove write-protect

    Step5: type "attributes disk clear readonly" and enter.

    run cmd to remove write-protect

    Method9: Use Related Software — Write Protection Remover Software

    Are you still not able to disable that memory card or flash drive write protection, even when you do have tried above mentioned four methods? OK! If you do find no right way to remove this write protection error, you can directly take chances with related software that can help you get rid of that write protection error with ease clicks. Simply open your Google or other similar websites and search for one over the internet.

    Method10: Do Antivirus Scanning Process or Low Level Formatting Process There

    Sometimes, when you are sure the write-protection is not opened, you also can receive such write-protected device error due to virus-infection error or some storage device damages. So, in order to check whether it is caused by unknown viruses, you can merely run your antivirus tools to scan this memory card or flash drive. If antivirus tools find no dangerous or suspicious information on your storage device, simply format this device and see whether the formatting can make a difference. If the formatting process also cannot be performed there, you’d better choose a device format tool and level format this device to take chances.

    Читайте также:  Как делать видеоролик из фотографий

    Related Tips:

    Related tips f to remove write protection

    1).Purchase a new storage device to instead the "write protected" one timely.

    This write protection error also can pop out when your storage device is physically damaged. So, if you do have tried several methods mentioned above and also are in vain, this device must be damaged seriously, with enough money, simply buy a new one for future use.

    2). Back up all memory card or flash drive data well in advance, if possible.

    No matter which method you are going to try, the stored device data is really important and cannot be deleted or lost, right? If possible, always back up these left device stuffs well in advance.

    3). Recover data from write-protected memory card or hard drive with data recovery software.

    If you really cannot save one, two or more copy of everything inside on other drives or locations at first and also format this memory card card or hard drive to remove its write-protection problems at last, you also have no need to worry too much. After accidental deletion or format, people also can try to recover data from memory cards, flash drives or hard drives with free data recovery software. So, download one and check whether your original photos, documents, videos or the likes are still recoverable.

    If your USB drive is write protected, you can’t copy files or format it and you can receive an error – “the disk is write-protected”. To make the USB drive writable, learn how to remove write protection from USB drive.

    By AOMEI / Last Updated December 2, 2019

    Nowadays, most of us have one or more USB flash drives, which are usually used to store and transfer data among computers, create Windows To Go workspace, install and run portable applications, connect to a wireless network, and backup files. Some users who often use USB drives may have come across the following error messages.

    Error during formatting USB: "When I format my USB pen drive, it shows the error message — The disk is write protected. I have tried various methods to solve this but all are not working. There is no write protection switch on it. It is a SanDisk Cruzer Edge 8GB USB. I am using Windows 7. Please give me solution to fix it."

    Error during copying file to USB: "While trying to transfer files from my Windows 10 PC to a Kingston DataTraveler 32GB USB flash drive, I received an error message — The Disk is write-protected. Remove the write-protection or use another disk. Now I can neither copy files to the USB drive nor create new files from the USB drive. The PC is upgraded from Windows 8.1. How do I disable the write protection?"

    What is write protection on USB?

    Write protection (also called read-only) can be physical or virtual. A USB drive is enabled with write protection has the ability to prevent new files from being written or old files being changed. Typically, this means you can only read the data which are already stored on the USB, but you can’t delete or modify them. By using write protection, you can make ensure data is not accidentally overwritten or erased.

    How to remove write protection from USB drive effectively?

    If you are reading this post, you must be one of them. Deep breath and stay calm. No matter whether you are using Windows 7, Windows 8 or Windows 10, I am going to walk you through a few easy steps to remove write protection and make your USB flash drive or SD card writable again.

    Step 1. Check the write protection switch if available

    Some USB flash drives have a physical switch which allows you to lock or unlock write protection. The location of a switch on a USB flash drive will be different. Make sure the lock switch is slid up to unlock position. You will not be able to transfer files to the USB drive if it is locked.

    If the write protection switch on your USB drive is off and you still get the error message or there is no physical switch on your USB drive, please skip to Step 2.

    Читайте также:  Комплект для сборки 3д принтера

    Step 2. Clear read-only attributes with DiskPart utility

    2.1. Press Windows key + R combination on your keyboard. In the pop-up Run dialog box, type diskpart and hit Enter or click "OK" to open the DiskPart Command Prompt.

    2.2. Type the following commands one by one and hit Enter after each:

    list disk — all of the disks connected to the computer will be displayed, including internal hard drives.

    select disk n — where n is the number of USB flash drive. You can use the Size column to identify which one it is.

    attributes disk clear readonly — change your USB’s properties so that it is no longer read-only.

    2.3. Close DiskPart Command Prompt and re-plug your USB flash driveto check if the write protection error is resolved. If not, please try the next step.

    Step 3. remove write protection through editting the registry

    3.1. Press Windows key + R combination on your keyboard. In the pop-up Run dialog box, type regedit and hit Enter or click "OK" to open the Registry Editor.

    3.2. Expand the entries on the left-hand pane to navigate to the following path:

    3.3. On the right-hand pane, double-click on the WriteProtect or right click on it and select "Modify". In the pop-up window, you may find that the "Value data" is set to 1 which means current computer is enabled with write protection on USB storage device. To disable it, you need to change the value from 1 to 0 and click OK to apply the change.

    3.4. Close Regedit Editor and connect your USB drive to the computer again, and you should find the USB write protection has been removed. If not, please follow the Step 4.

    Tips of Step 3:

    If there is not a "StorageDevicePolicies" folderunder the "Control" folder, you can right click "Control" folder and choose "New" -> "Key". Name it with StorageDevicePolicies and then open it.

    Right click on the white space at the right-hand pane and choose "New" -> "DWORD (32-bit) value". Name it with WriteProtect. And then, double-click on it to check if the Value data is set to 0.

    Step 4. Format write-protected USB drive with free partition manager

    If you’ve tried all steps above and still can’t remove write protection from USB drive, the reason might be corrupted file system. To settle out it, you can try to format the USB drive. The problem is how to format a write-protection USB?

    AOMEI Partition Assistant Standard is a free partition manager software and disk management tool for computers running 32-bit or 64-bit version of Windows 10, Windows 8.1/8, Windows 7, Vista and XP. It supports the all types of disk, including mechanical hard drive, SSD, SSHD, external hard drive, USB flash drive, SD card, etc. It enables you to format a USB drive easily and quickly.

    To enjoy more advanced features, such as recover lost partition, clone GPT system disk, convert dynamic disk into basic, etc., you can upgrade it to Professional version.

    Note: Formatting a USB will delete all data on it. Therefore, make sure that you backup all the data from USB drive to your computer.

    4.1. Free download, install and launch AOMEI Partition Assistant Standard. Right click on the USB partition and select "Format Partition".

    4.2. In the pop-up window, you can name the USB drive by editting "Partition Label" and change file system. By default, a USB drive is formatted as FAT32, which ensures cross-platform compatibility. However, FAT32 limits a single file size up to 4GB. If you would like to store larger files on your USB flash drive, you should format it to NTFS. And then, click "OK" to continue.

    4.3. Your USB has not been formatted yet. To save the change, you need to click "Apply".

    The formatting progress shouldn’t take too much time. Of course, the more data on the USB, the more time the formatting will take. If there is no physical damage or bad sectors with the USB drive, it will be formatted, cleaned and writeable.

    Since the reasons for write protection USB are different, some step may fail to remove write protection from USB drive. If so, please skip the step to try next step. All the steps apply to remove write protection from SD card.

    Tips: Besides USB flash drive, the popular cloud drive is also a good choice for data storage, like Google Drive, OneDrive and Dropbox. Being troubled to manage the multiple cloud drives? There is a free multi clouds manager – MultCloud which can help with that, such as directly transfer files from Google Drive to OneDrive.

    Ссылка на основную публикацию
    Php определить длину строки
    (PHP 3, PHP 4, PHP 5) strlen -- Возвращает длину строки Описание int strlen ( string string ) Возвращает длину...
    Https ok ru dk cmd logexternal
    Социальная сеть «Одноклассники» — найди друзей Одноклассники – социальная сеть, которая пользуется большой популярностью среди тех, кто хочет отыскать друзей...
    Huawei e160g прошивка под всех операторов
    Прошивка и разблокировка брендированных модемов/телефонов/роутеров/планшетов Мы ВКонтакте Наш канал Голосование Последние посетители ziko01201[ 16 мин, 54 сек назад ] tentser[...
    Php формирование pdf документа
    С помощью расширения dompdf можно легко сформировать PDF файл. По сути, dompdf – это конвертер HTML в PDF который поддерживает...
    Adblock detector